Arc Vision
Powered by MEA
All machine data is invented. This is a demo starting point for the Hitachi Challenge Europe Theme 3 direction — not a Hitachi integration, not a validated diagnostic product and not a production deployment. Workflow state is synchronized to an isolated guest Cloud workspace when available; photos remain local. This is not a tamper-proof audit log. Planner/Technician are view presets, not authorization roles.
Publisher links and locally served, credited visuals. References support review; they do not establish installed equipment identity, fault, or product suitability.
19 technical references · 26 visual resources · OEM documents remain on publisher sites
Catalogue expanded
11 new technical references and 13 new category-specific visuals are shown first.
45 total resources
Maintenance guidance
DOC-17 · Web reference
SKF India e-marketplace · Live product page; checked 24 September 2026
Designation and technical specifications.
Designation cross-reference only; manufacturer, fit, seals and replacement suitability are unverified.
DOC-18 · Web reference
SKF India e-marketplace · Live product page; checked 24 September 2026
Designation and technical specifications.
Designation cross-reference only; manufacturer, fit, seals and replacement suitability are unverified.
DOC-19 · Web reference
SKF India e-marketplace · Live product page; checked 24 September 2026
Designation and technical specifications.
Designation cross-reference only; manufacturer, fit, seals and replacement suitability are unverified.
DOC-09 · Standards page
ISO · ISO 15243:2017
Normative vocabulary and classification for rolling-bearing damage and failure modes.
Classification reference only. Access may require purchase; no standard text is reproduced and no demo finding is established by this link.
DOC-10 · Standards collection
ISO · ISO 20816 series
Machine-vibration evaluation framework and applicable machine-part guidance.
Standards-family orientation only. The demo thresholds are illustrative and are not represented as ISO limits.
DOC-11 · Standards page
IEC · IEC 60034-1
Ratings, operating conditions, performance and marking for rotating electrical machines.
General motor terminology reference only; demo motor identities and compliance are unverified.
DOC-12 · Standards page
API · API Standard 610, 12th edition
Pump design, bearing housing, coupling and mechanical-test context.
Scope reference only. The standard is not redistributed and the demo pumps are not claimed to conform.
DOC-13 · PDF
IOGP · S-615, Version 2.0, Addendum 1, December 2025
Supplementary pump requirements and data-sheet context.
Industry context only; it does not establish the specification or compliance of a demo asset.
DOC-14 · PDF
SKF · PUB 140-710
Mounting, lubrication, inspection and maintenance practices for rolling bearings.
General practice reference only. Use the installed equipment instructions and approved work method for real work.
DOC-15 · PDF
SKF · 2018 catalogue
Bearing designations, dimensions, fits, housings and mounted-product context.
Catalogue cross-reference only; no manufacturer, fit or replacement suitability is assigned to a demo asset.
DOC-16 · Standards page
NEMA · NEMA MG 1
Motor ratings, performance, construction, testing and marking terminology.
General terminology reference only; demo motor compliance and frame identity are unverified.
DOC-01 · PDF
ABB · 3GZF500730-85, Rev H, 2022
English maintenance p.19; lubrication pp.20–22; bearing service p.23; troubleshooting p.25.
General reference only. Demo assets are not verified ABB motors.
DOC-02 · PDF
KSB · 1311.8/11-EN; 19 June 2026
Servicing/maintenance p.48; troubleshooting p.70; assembly drawings pp.72–82.
Example pump-family reference only. No Etanorm identity or configuration is assigned to a demo unit.
DOC-03 · PDF
SKF · PUB BU/I3 14219/3 EN; June 2025
Inspection and troubleshooting pp.8–29; damage classification from p.40; damage/actions from p.62.
Diagnostic reference, not proof of a fault in a demo case.
DOC-04 · PDF
SKF · PUB SR/P7 10001/1 EN; September 2011
Lubrication from p.178; inspection from p.216; troubleshooting from p.228.
Historical reference. Use the applicable current equipment manual for real work.
DOC-05 · Web reference
SKF India e-marketplace · Live product page; checked 24 September 2026
Designation and technical specifications.
Designation cross-reference only; manufacturer, fit, seals and replacement suitability are unverified.
DOC-06 · Web reference
SKF India e-marketplace · Live product page; checked 24 September 2026
Designation and technical specifications.
Designation cross-reference only; manufacturer, fit, seals and replacement suitability are unverified.
DOC-07 · Web reference
SKF India e-marketplace · Live product page; checked 24 September 2026
Designation and technical specifications.
Designation cross-reference only; manufacturer, fit, seals and replacement suitability are unverified.
DOC-08 · Web guide
ifm · Live technical guide; checked 24 September 2026
Sensor locations and monitoring methods; centrifugal-pump and electric-motor examples.
Guidance only; not confirmation of an installed ifm device or exact sensor position.
Illustrative context
Pump and motor skid context
GEN-01 · equipment · illustration
Generated training illustration of a centrifugal-pump drive train; not an installed demo asset or site photograph.
Generated for Arc Vision · synthetic illustrative media
Open original
Drive-end bearing cutaway
GEN-02 · bearing · illustration
Generated cutaway showing the drive-end shaft, bearing, end shield and an illustrative grease path; not an engineering drawing.
Generated for Arc Vision · synthetic illustrative media
Open original
Laser shaft-alignment setup
GEN-03 · alignment · illustration
Generated illustration of a pump-to-motor alignment setup. Follow the approved site procedure and instrument instructions for real work.
Generated for Arc Vision · synthetic illustrative media
Open original
Dial-indicator alignment check
GEN-04 · alignment · illustration
Generated maintenance illustration of a dial-indicator setup; not a dimensional acceptance record.
Generated for Arc Vision · synthetic illustrative media
Open original
Drive-end vibration sensor mounting
GEN-05 · measurement · illustration
Generated example of a sensor mounted on a motor end shield; it does not document any demo measurement point.
Generated for Arc Vision · synthetic illustrative media
Open original
Motor thermography example
GEN-06 · measurement · illustration
Generated thermal-style view for inspection context only; temperatures and colors are not measurements.
Generated for Arc Vision · synthetic illustrative media
Open original
Outer-race spalling example
GEN-07 · bearing · illustration
Generated educational example of raceway damage; it is not evidence from a demo inspection.
Generated for Arc Vision · synthetic illustrative media
Open original
Controlled bearing lubrication
GEN-08 · lubrication · illustration
Generated maintenance context. Lubricant, quantity and procedure must come from verified equipment instructions.
Generated for Arc Vision · synthetic illustrative media
Open original
Flexible coupling cutaway
GEN-09 · alignment · illustration
Generated coupling cutaway for orientation; not a statement of the coupling installed on a demo asset.
Generated for Arc Vision · synthetic illustrative media
Open original
Motor nameplate inspection
GEN-10 · inspection · illustration
Generated inspection context with deliberately unreadable plate data; no manufacturer or rating is asserted.
Generated for Arc Vision · synthetic illustrative media
Open original
Measurement direction overview
GEN-11 · measurement · illustration
Generated radial and axial direction overview. It is not a plant measurement-point drawing.
Generated for Arc Vision · synthetic illustrative media
Open original
Manual vibration route
GEN-12 · measurement · illustration
Generated example of a technician collecting a portable reading; no displayed value is demo evidence.
Generated for Arc Vision · synthetic illustrative media
Open original
Bearing inspection bench
GEN-13 · inspection · illustration
Generated inspection-bench context; not a removed component or completed finding from the demo.
Generated for Arc Vision · synthetic illustrative media
Open original
Pump-room context photo
IMG-01 · photo
Illustrative hydronic pump installation. Not a photograph of an M2M demo unit.
Saud · CC BY-SA 4.0 · Resized to 1600 px WebP; orientation normalized; metadata removed.
Open original
Centrifugal-pump system schematic
IMG-02 · diagram
External schematic example; dimensions and layout are unrelated to the demo plant.
Aishwarya13333 · CC0
Open original
Electric-motor cutaway
IMG-03 · photo
Reference motor cutaway. Not the installed motor and not evidence for a specific bearing.
S.J. de Waard · CC BY 2.5 · Resized to 1600 px WebP; orientation normalized; metadata removed.
Open original
Industrial pipeline pump
IMG-04 · photo
Reference oil-pipeline pumping installation; not a direct match for the demo units.
Wilfra · Public domain · Converted to WebP; metadata removed.
Open original
Bearing-motion illustration
IMG-05 · animation
Generic bearing-motion illustration; not live telemetry.
PlusMinus · CC BY-SA 3.0 · Static first-frame alternative created; original animation retained for user-controlled playback.
Open original
Deep-groove bearing cutaway
IMG-06 · illustration
Generic bearing illustration, not a product image for 6312/C3, 6210/C3 or 6316/C3.
Jonmarconn · CC0
Open original
Centrifugal Pump
SCADA-01 · diagram
Static pump/motor schematic illustration. It is not measured sensor data or a plant P&ID.
ThingsBoard Authors · Apache-2.0 · unmodified static SVG
Open original
Electrical Engine Hp
SCADA-02 · diagram
Static pump/motor schematic illustration. It is not measured sensor data or a plant P&ID.
ThingsBoard Authors · Apache-2.0 · unmodified static SVG
Open original
Horizontal Pipe
SCADA-03 · diagram
Static pump/motor schematic illustration. It is not measured sensor data or a plant P&ID.
ThingsBoard Authors · Apache-2.0 · unmodified static SVG
Open original
Left Motor Pump
SCADA-04 · diagram
Static pump/motor schematic illustration. It is not measured sensor data or a plant P&ID.
ThingsBoard Authors · Apache-2.0 · unmodified static SVG
Open original
Pump Hp
SCADA-05 · diagram
Static pump/motor schematic illustration. It is not measured sensor data or a plant P&ID.
ThingsBoard Authors · Apache-2.0 · unmodified static SVG
Open original
Right Motor Pump
SCADA-06 · diagram
Static pump/motor schematic illustration. It is not measured sensor data or a plant P&ID.
ThingsBoard Authors · Apache-2.0 · unmodified static SVG
Open original
Small Right Motor Pump
SCADA-07 · diagram
Static pump/motor schematic illustration. It is not measured sensor data or a plant P&ID.
ThingsBoard Authors · Apache-2.0 · unmodified static SVG
Open original